Some 3d Printed parts for the engine section; the test fitting to the painted brass frame in the first photo.
Two cylinders are required; one (used twice) needs the grooves to clear the frame tubes. I will produce silicone tools for these.
The engine bell has been tooled and split (see my fun stop motion); good resins have been produced. The one image shows the tool in production after degassing in my vacuum tank.
Two cylinders are required; one (used twice) needs the grooves to clear the frame tubes. I will produce silicone tools for these.
The engine bell has been tooled and split (see my fun stop motion); good resins have been produced. The one image shows the tool in production after degassing in my vacuum tank.
RSS Feed