Got some time on the CAD to design some new 6mm scale gaming terrain / scatter terrain. A couple of storage receiver / chemical tank type things and a small terraforming building with a nice big fan on the roof.

Available on my Shapeways but I will get going on my B9Creator.

I am building up a set of Gothic styled church / temple ruins to print. these designs are available via Shapeways. I like them; they make good table details for Sci-Fi, fantasy, or historical war gaming. Check out my Shapeways Shop.

Added to the Shapeways Store.

2 versions of the radar tower; both with a control bunker below the base / in the base, one with a larger dome and extended supporting structure.
The structure / base is available on its own or with a hollowed out water tower.

The radar control towers are in scale equivalent to about 20m tall and the water tower when assembled at about 25m tall.

I have some 6mm 1/285 resin buildings and items for sale on ebay. I have adjust the price to offer a better deal.

See the ebay page here.

​I don't have any feedback and wonder if this is why I didn't get much interest before (I have sold a few bits and pieces elsewhere with good feedback).

If you have come across this page and might be interested, thank you - I am honest, the prices I believe are fair but I am looking for positive feedback on ebay. If you are interested in the items and mention this post in the Paypal notes I will send a couple of extra items free. I will send my large command centre and the other smaller command bunker (the hex shaped one). These can be found in the blogs - check the data sheet filter and found on the Shapeways page.

Thanks for reading, feel free to get in touch if you are interested in a different set of parts or if you have any other feedback. Contact me or comments here are good for me.

​Thanks

Julian

Above, some CAD work sent to me by a gamer in Rugby; Norbert is making a diorama for use at the club he attends, the Outlanders Gaming Club. I split the model to make it best positioned to produce some very fine details - the side runes are 0.2mm across. The print is very good and produced on my B9Creator.

Below, a design of quadruped styled mechanical walker - Mecha / Battletech / MWO / Mech Warrior styled gaming. 6mm Scale, ready to be printed by me and available on Shapeways.

I have been on the Facebook War Gaming Trade and Sell page, see the comments for a deal on a bundle set of buildings here or give me a shout via the contact button.

I have put together a Sci-Fi Building set; suitable for 6mm scale gaming. Message me if interested, £24 with UK free post. Will post overseas.

Advertised on the Facebook page Wargame Trade and Sell 6mm - 10mm and managed to discuss making a set or 2 with Glenn from North Down War Gaming Centre.

A £30 set and an £18 Set. Both include UK post but quite happy to post overseas.

Get in touch via the contact page or via the Facebook gaming page.

Thanks

For sale? I don't know, I should but what price, where to post to, and what quality is acceptable? Testing the water, a set of two bunkers and two missile silo's.

Resin has pin holes; not bad, I easily deal with and hardly ever fill with anything but paint. Any feedback - what are these worth are they worth posting overseas (I can but the cost?)

For reference the squared paper is 5mm squares. See Datasheet link.

I look forward to any feedback.

Additional.....
Now on eBay

Had some spare silicone after doing a couple of tools for the Eagle Kit Bashing.
Open top resin casts are not bad, good details but some small pin holes. These should fill with bit of paint or if I have to, some putty or filler.

Have a couple of designs of tower items for my radar building. Don't like the spiral design and don't like the hex based design much better.
Would prefer a hollow steel structure better but also want to design a model that can be replicated in resin as well.
Any ideas?
I am going to produce both and see what they look like in the flesh, they might make nice stands / plinths for figures as well.

The B9 printer is great but the setting up of the part takes some skill or at least recognition of importance. I needed two attempts to build my radar model. This part is thin walled and my first build wasn't so good, the build must have wobbled or move during the layer process, the edges were not great and the layer stepping exaggerated. A change of orientation and design of the supporting structure resulted in a much improved build and in fact one of the better builds I have produced.

Large moon base / communications base.
So big it will need to be built in two parts on the B9Creator.
The data sheet is attached below.
This one will be good when in resin.